v

您的位置:VeryCD软件多媒体类

软件资源事务区


《EUKLID 2004.3》(3D-CAD/CAM)

  • 状态: 精华资源
  • 摘要:
    发行时间2004年
    制作发行http://www.dynageo.de/
  • 时间: 2005/03/13 08:22:00 发布 | 2005/03/13 08:22:00 更新
  • 分类: 软件  多媒体类 

sialove

精华资源: 23

全部资源: 44

相关: 分享到新浪微博   转播到腾讯微博   分享到开心网   分享到人人   分享到QQ空间   订阅本资源RSS更新   美味书签  subtitle
该内容尚未提供权利证明,无法提供下载。
中文名EUKLID 2004.3
版本(3D-CAD/CAM)
发行时间2004年
制作发行http://www.dynageo.de/
地区德国
简介

IPB Image
http://www.briegel-online.de/mathe/m7/euklid-7-5.JPG
EUKLID是一套3D-CAD/CAM系统,能创建最优化的自由形状表面,为铸造、锻造建模提供了详细的解决方案
EUKLID Forging. A functional overview.
The numerous individual functions of EUKLID Forging provide a solution for every forging-related task, efficiently and conveniently:

Design of flexible removal draughts
Design of the flash line
Design of the flash removal tools
Partial expansion
Partial calibration
Derivation of the preform geometry

Design of flexible removal draughts
The separation of the die block into the upper and lower dies by means of the parting curve is a demanding task when designing the tool.
The separation must be calculated exactly so that the workpiece can be released from the tool after forging and the superfluous material can be removed from the forged component.
This process is complicated, as depending on the nature of the workpiece, the parting curve does not lie in one plane. EUKLID Forging supports the definition of the removal draughts and thus solves the problem. The removal draughts can be defined to be variable while maintaining a minimum extraction angle and without alignment errors between the parting curve and the appropriate half of the die. The alignment between the parts of the tool can thus be accurately determined.

Design of the flash line
The outflowing of the forging material is controlled in the design by defining the flash line along the parting curve. In order to make an optimum calculation, EUKLID takes into account all specified parameters such as the shape of the cross section, orientation and sizing.
Using EUKLID Forging, complex flash line surfaces with stepped parting lines and variable profile can be created in a short time. If the user wants to change complete surfaces, define new intermediate profiles or change the position of these, EUKLID Forging automatically re-calculates the appropriate flash line. Additional manipulating functions are also available with which the flash surface can be partially optimised.

正在读取……

这里是其它用户补充的资源(我也要补充):

暂无补充资源
正在加载,请稍等...

点击查看所有12网友评论

 

(?) [公告]留口水、评论相关规则 | [活动]每日签到 轻松领取电驴经验

    小贴士:
  1. 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  2. 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  3. 勿催片。请相信驴友们对分享是富有激情的,如果确有更新版本,您一定能搜索到。
  4. 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。
  5. 如果您发现自己的评论不见了,请参考以上4条。