cFosSpeed - 使用了通信量调整功能，可以让您获得更快的访问速度。
cFosSpeed - 网路加速器
cFosSpeed是一个可以依附在现有网路连线上的网路驱动程式。安装它之后，它将以 Taffic Shaping最佳化您的资料传输。
Traffic Shaping是一种最佳化网际网路流量的方法。它让您在使用您最大的速度时，同时享有最低的 Ping值。
cFosSpeed可以和路由器及（或者是） DSL数据机或 cable数据机并用；此外您也可以将 cFosSpeed和其他类型的网际网路连线并用。
cFosSpeed支援多种连线，像是 DSL、 cable、 ISDN、 UMTS, WIMAX……等等。
高级Traffic Shaping （通信量调整功能）；
与通用的 PPPoE 驱动器兼容；
应答游戏以及例如 eMule，Kazaa 等的对等网络；
Windows XP / Windows Vista / Windows 7以及 Windows 2000
32位元 / 64位元 (x64)
cFosSpeed is a network driver, which attaches itself to existing Internet connections. It then optimizes data transfer by means of Traffic Shaping. Traffic Shaping is a method for optimizing the Internet traffic. It allows maximum speed while ensuring minimal Ping. You can use cFosSpeed with a router and/or a DSL-modem or cable-modem. You can also use cFosSpeed with other types of Internet access, ie. whenever you already have an existing Internet connection. cFosSpeed supports a wide variety of connections, like DSL, cable, ISDN, UMTS, etc.
* Added support for Logitech G15 and G19 Gamer keyboards. When cFosSpeed
detects such a keyboard, it offers a the option to display the status
window on the display of the G15 or G19 display. If you enable it,
the skin windows will then be displayed on the keyboards display,
thereby offering all cFosSpeed Traffic Shaping information during
fullscreen mode apps / games. In addition, you can switch between
low latency / favour bandwidth wit the Button 1 on the G15 and the
UP Button on the G19.
Skins for Logitech G15 & G19 were donated by Ingo Günther.
* Added keyboard LED indicators. cFosSpeed can indicate certain
traffic shaping values by blinking the Num Lock and Scroll Lock
LEDs. See http://www.cfos.de/en/cfosspeed/documentation/keyboard-leds.htm
for more information.
+ When the traffic class is still not set (at the beginning of a connection)
the class column will display "working" or nothing. If more traffic is
coming, the class name will be shown or when no rule matches and no class
has yet been set for a connection the class is set to default.
+ If traffic shaping is (partly) inactive, this is now shown in "spd speed"
+ Added -udp-vol rule: it counts the volume of an UDP pseudo-connection.
Volume in this sense are all bytes including the IP and UDP header.
Added -udp-cnt rule: it counts the number of UDP packets in an UDP
+ Extended arguments for -tcp-seq and -tcp-cnt rules to 64 bit.
+ Added gset variable tx_shape, default 1, to en/disable tx-shaping globally.
x TCP SYNs were not properly prioritized. Fixed.
x Uploads do now slow down downloads less than before.
x Fixed behaviour of overlapping active areas in skins. Now the topmost one
catches the mouse click.
x For troubleshooting, you can now specify the Net Talk broadcast address.
Use "spd set net_talk_bcast x.x.x.x" to do that, address 0.0.0.0 means
use default, which is 255.255.255.255 or the subnet broadcast address like
192.168.0.255. Thanks to Drool for inspiration.
x Fixed serious bug in -l7-prot, -udp-prog, -tcp-prog and -prog filter rules
when they were used with negation (like -l7-prot !@user.ini/normalprots).
This caused program and protocol settings to malfunction if you had made
changes to them (changes are recorded in user.ini and filter rules contain
negations to read them properly). This bug was introduced in since
v5.13.1694. Thanks to km for his bug reports.
x The installer started the status window with elevation. Fixed.
x Fixed installation problems where cfosspeed.exe could not be overwritten.
x Fixed a potential problem when stopping a system service. Thanks to Richard
B. for testing.
x Skins would not display more than 21Mb/s speed. Fixed. Thanks to kamcm for
x Fixed a long-standing problem where cFosSpeed might perform poorly after a
wakeup from standby. Notably, UDP connections would not time-out and ever
increase in numbers.
x Fixed a error where certain skins would be incorrectly loaded and thus not
displayed at all.
x Fixed a bug in -prog and -l7-prot filters: they did not properly accept
multiple arguments separated by commas. Thanks to Thomas Quella for his bug
x Large ping values were always displayed as 999ms. Fixed.
x On some machines the status window was always topmost. Fixed.
x Fixed a spurious freeze. Thanks to Andrey Chernov for dump file.
x For Windows 7 the main icon is not hidden as long as at least one icon skin
is displayed. Otherwise Windows cannot remember the icon settings. If you
don't want to see the main icon, you can disable it in the context menu. For
older OSes the main icon is hidden as long as at least one icon skin is
x Variance accommodation now works for satellite connections with their very
long ping times as well. Thanks to ipcopter.de for help and support.
x No pinger boot will be done if both rx_shape and tx_shape are 0.
x Better tracking if test-pings reached the destination. If so, pinger will
not be used for burst and pingstat line starts with a '+'.
- Tested cFosSpeed with "teaming". We used an Intel Gigabit ET Dual Port
Server Adapter and their most recent teaming software v16.2. Please note:
The route to the Internet must go through the virtual teaming adapter,
not through one of the individual teamed adapters.
- Important notifications, e.g. the calibration notification and the trial
period expiration messages are now indicated by a symbol in the status window
if the skin supports it. Otherwise, the usual browser popup is used.
If you click on the symbol the corresponding website is displayed.
- The options menu is now also available for non-admins.
- More trace output for an installation problem where the service can not be
- By default max_trace_size is now 10 mbytes.
- Switched to new compiler.
- If for some reason test-pings reach their destination (i.e. they are not
returned with "TTL exceeded"), we inhibit further test-pings with that TTL.