SEQ1 Master Edition
SEQ2 Master Edition
* 现已已支持 VST3 和 RTAS。
The Complete Master Edition include: Visualizer VST, SEQ 1 and SEQ 2 Master Edition VST, Monofilter VST, Stereoizer VST, Stereoplacer VST, Line-up VST, And three documents which are available registred users.
Used and trusted by producers the world over, MONOFILTER grabs hold of your bass and secures it solidly within your mix. Intuitive controls allow you to quickly anchor the power, whilst retaining the essential character and perceived spatial characteristics. MONOFILTER brings back the centre of your bass, so easily lost through stereo effects processing, synth sound generation, unwanted phase inconsistencies and live recording mic. bleed. Our market leading features now give you clear control over stereo spread, transition and phase alignment, and the unique WYSIWYG interface gives you clear and exacting visual feedback.
Designed for adding adjustable stereo spread to mono or stereo input signals Stereoizer gives you the controls you need to take your sounds into new dimensions. With mono-compatible features and dynamic control for a shifting stereo image, Stereoizer 2 can generate the full range of stereo enhancement, from subtle depth control to full dynamic shifting and phase realignment. Great for percussion parts, lifeless pads, static lead sounds – anything that needs that little bit extra.
Adjust the position of percussion sounds in a stereo loop, or add stereo positioning to mono samples, placing frequencies exactly where you want them. Stereoplacer gives you control that is simply not available within a traditional mix setup. Stereoplacer is a fine-tune parametric EQ with the addition of stereo positioning controls. This allows you to tune each band into specific frequencies and move the frequency content around in the stereo sound stage. You can also apply different amounts of cut and boost to the Left and Right channels, or allow Stereoplacer to keep the balance of the original sounds while you choose the position.
Also, we included:
Line-up is a delay unit, specifically designed to allow rapid and simple sample-accurate delays to be set-up with minimum CPU overhead and screen imprint. Delay time automatically steps through powers of two to allow rapid dial-in of frequently required numbers. Double-click allows direct numerical entry and holding down shift whilst click-dragging steps through in single samples. Although primarily intended as a line up tool for misaligned tracks (no host PDC, phase re-alignment, long mic/speaker recording delay, etc.), Line-up can also be used as a send effect to create very precise chorus, phase and doubling effects.
²² ² ²
²° ° ° °±
±±² ° °° °° ° °±²°
°²± °±° °±° °±° °±° °°±
° ±²° ±²° ±²° ±²° °° ±°²
²°° ° ° °° ° ° ° °° ° ° °° ° ° ° °°²
²° ° ° ° °°²
²° ° ° ° ° ° ° ° ° ° ° ° ° ° °°²
±° ° ° ° ° ° ° ° ° ° ° ° ° ° °°±
°° ° ° ° ° ° ° ° ° ° ° ° ° ° °°°
SUPPLIER ..: TEAM AiR
PROTECTION : C/R
SIZE ......: 03 * 9,54MB
DATE ......: 04/2011
± ² ± ² ²± ² ±
Monofilter is a mastering quality stereo and phase alignment tool designed
to secure low frequencies solidly within your mix. Intuitive controls allow
you to quickly anchor the power, whilst retaining the essential character
and perceived spatial characteristics.
The SEQ 1+2 Series EQs are designed to deliver transparent, scaleable,
connective EQ without the phase warping and phase smearing artefacts common
in traditional digital EQ, giving a clearer sound and sharper transients.
Stereoizer is a high-specification stereo image manipulation tool suitable
for natural expansion, reduction and introduction of stereo width at any
stage of the audio production process.
Stereoplacer is designed for direct manipulation of frequencies in the
stereo image. Each of the four channels can be tuned to affect a specific
frequency as with a traditional parametric EQ. Once tuned, the frequencies
can be moved within the stereo field. Useful for adjusting an existing
stereo signal or adding stereo depth to a mono signal. The tunable nature
makes this especially suited to adjusting percussion signals.
VisLM is a Loudness Metering solution. It is fully compliant with the
latest loudness standards ITU-R BS1770 and EBU R128 and offers a complete
professional solution to loudness and true peak metering forMix,
Mastering, Film and Broadcast.
Visualizer is a comprehensive and flexible FFT audio analyser designed to
allow access to a full range of audio analysis views via a single resizable
interface, using a unique intelligent window system to manage the controls
and screen layout.
Whats new in v2.0:
- VST, VST3 (32bit & 64bit)
- Numerous improvements and bugfixes
² ² ² ± ² ²² ± ±
1) Unzip, Unrar and install
2) Use our keygen to generate serials you require
and press register to write them to registry
3) Enjoy this fine Team AiR release !!!
² ² ± ± ² ² ²
nFO bY ThE AiRBEARS 2011