SEQ1 Master Edition
SEQ2 Master Edition
If you find your production work can be slow and difficult, imprecise or arbitrary. Problems are difficult to track down and mixing can become a strange balance of guesswork and intuition, then you need some better tools.
SEQ 1 and SEQ 2 Master Edition v1.2.6
The NuGen Audio SEQ series, unlike many digital EQ's, is linear phase. This means that the phase shift is linear across the frequency spectrum, resulting in a natural sounding EQ change, and producing minimal phase artifacts. Traditional EQ algorithms employ a mathematical technique known as IIR (Infinite Impulse Response). Whilst this provides low CPU usage and is relatively simple from a mathematical point of view, there is an important side effect known as Phase Warping. Digital EQ utilising the classic the IIR approach distorts the relationship between frequency and phase. The computational algorithm employed in SEQ1 is based up on FFT (Fast Fourier Transform Analysis). This is a much more involved process, involving transformation of the audio data into the frequency domain, before applying frequency related computations and then transforming back into the temporal domain. The advantage of this process is that the frequency and temporal relationship remains intact -- linear phase transformation. The benefit of this method is that linear phase adjustments sound clearer, it is possible to create a much more transparent EQ using this technology. Phase Warping also affects the clarity of transients, as it causes Phase Smearing. Linear Phase calculations avoid this limitation, producing a sharper audio image.
Used and trusted by producers the world over, MONOFILTER grabs hold of your bass and secures it solidly within your mix. Intuitive controls allow you to quickly anchor the power, whilst retaining the essential character and perceived spatial characteristics. MONOFILTER brings back the centre of your bass, so easily lost through stereo effects processing, synth sound generation, unwanted phase inconsistencies and live recording mic. bleed. Our market leading features now give you clear control over stereo spread, transition and phase alignment, and the unique WYSIWYG interface gives you clear and exacting visual feedback.
Designed for adding adjustable stereo spread to mono or stereo input signals Stereoizer gives you the controls you need to take your sounds into new dimensions. With mono-compatible features and dynamic control for a shifting stereo image, Stereoizer 2 can generate the full range of stereo enhancement, from subtle depth control to full dynamic shifting and phase realignment. Great for percussion parts, lifeless pads, static lead sounds - anything that needs that little bit extra.
Adjust the position of percussion sounds in a stereo loop, or add stereo positioning to mono samples, placing frequencies exactly where you want them. Stereoplacer gives you control that is simply not available within a traditional mix setup. Stereoplacer is a fine-tune parametric EQ with the addition of stereo positioning controls. This allows you to tune each band into specific frequencies and move the frequency content around in the stereo sound stage. You can also apply different amounts of cut and boost to the Left and Right channels, or allow Stereoplacer to keep the balance of the original sounds while you choose the position.
Also, we included:
Line-up is a delay unit, specifically designed to allow rapid and simple sample-accurate delays to be set-up with minimum CPU overhead and screen imprint. Delay time automatically steps through powers of two to allow rapid dial-in of frequently required numbers. Double-click allows direct numerical entry and holding down shift whilst click-dragging steps through in single samples. Although primarily intended as a line up tool for misaligned tracks (no host PDC, phase re-alignment, long mic/speaker recording delay, etc.), Line-up can also be used as a send effect to create very precise chorus, phase and doubling effects.
And three documents which are available registred users.
²² ² ²
²° ° ° °±
±±² ° °° °° ° °±²°
°²± °±° °±° °±° °±° °°±
° ±²° ±²° ±²° ±²° °° ±°²
²°° ° ° °° ° ° ° °° ° ° °° ° ° ° °°²
²° ° ° ° °°²
²° ° ° ° ° ° ° ° ° ° ° ° ° ° °°²
±° ° ° ° ° ° ° ° ° ° ° ° ° ° °°±
°° ° ° ° ° ° ° ° ° ° ° ° ° ° °°°
SUPPLIER ..: TEAM AiR
PROTECTION : C/R
SIZE ......: 04 * 4,77MB
DATE ......: 06/2010
± ² ± ² ²± ² ±
Monofilter is designed to provide a comprehensive interface for narrowing a
stereo signal towards (or to) mono below a specified frequency. Useful for
ensuring that sounds are suitable for mastering to vinyl and keeping a
check on LF signals in general, especially where stereo effects processing
has been applied. Can also be used in live Laptop applications to make sure
you get the tightest bass.
The SEQ1 and SEQ2 Series EQs are designed to deliver transparent,
scaleable, connective EQ without the phase warping and phase smearing
artefacts common in traditional digital EQ, giving a clearer sound and
Stereoizer is a high-specification stereo image manipulation tool suitable
for natural expansion, reduction and introduction of stereo width at any
stage of the audio production process.
Stereoplacer is designed for direct manipulation of frequencies in the
stereo image. Each of the four channels can be tuned to affect a specific
frequency as with a traditional parametric EQ. Once tuned, the frequencies
can be moved within the stereo field. Useful for adjusting an existing
stereo signal or adding stereo depth to a mono signal. The tunable nature
makes this especially suited to adjusting percussion signals.
Visualizer is a comprehensive and flexible FFT audio analyser designed to
allow access to a full range of audio analysis views via a single resizable
interface, using a unique intelligent window system to manage the controls
and screen layout.
Changes in v1.1
* added Monofilter v4
* added Steroizer v3
* various fixes and stability improvements
² ² ² ± ² ²² ± ±
1) Unzip, Unrar and install
2) Use Keygen and press register to write serial to registry
3) Enjoy this fine Team AiR release !!!
² ² ± ± ² ² ²
nFO bY ThE AiRBEARS 2010
Registering our previous release involved using Nugen Plugins activation menu
disconnection of the host machine from the net.
This release avoids that by writing serials direct to the registry
if required, by the user ...