v

您的位置:VeryCD软件多媒体类

软件资源事务区


《Maya骨骼插件》(AdvancedSkeleton for maya)1.85-3.6.1 更新至v3.7 For Maya8x-2011[压缩包]

  • 状态: 精华资源
  • 摘要:
    发行时间2011年01月08日
    制作发行animationstudios
    语言英文
  • 时间: 2009/12/24 05:00:36 发布 | 2011/02/26 04:40:29 更新
  • 分类: 软件  多媒体类 

icy02046

精华资源: 4

全部资源: 4

相关: 分享到新浪微博   转播到腾讯微博   分享到开心网   分享到人人   分享到QQ空间   订阅本资源RSS更新   美味书签  subtitle
该内容尚未提供权利证明,无法提供下载。
中文名Maya骨骼插件
英文名AdvancedSkeleton for maya
资源格式压缩包
版本1.85-3.6.1 更新至v3.7 For Maya8x-2011
发行时间2011年01月08日
制作发行animationstudios
地区美国
语言英文
简介

IPB Image

[操作系统]:Windows 7 64bit
[已通过安全检测]卡巴斯基KIS 11.0.1.400
[病毒库发布日期]2011-02-26 00:37:00
共享服务时间:不定时
共享服务器:随机

软件版权归原作者及原软件公司所有,如果你喜欢,请购买正版软件



压缩包校验:

AdvancedSkeleton_v1.85.For.Autodesk.Maya.ByB.G.7z   [CRC32:27A62BD8]

AdvancedSkeleton_v2.0.For.Autodesk.Maya.ByB.G.7z   [CRC32:21DCE08E]

AdvancedSkeleton_v3.0.For.Autodesk.Maya.ByB.G.7z   [CRC32:E8E3804A]

AdvancedSkeleton_v1.85_2.0_3.0.For.Autodesk.Maya.ByB.G.7z   [CRC32:4D7E9931]

AdvancedSkeleton_v3.1.For.Autodesk.Maya.ByB.G.7z   [CRC32:E52FCB7C]

AdvancedSkeleton_v3.5.For.Autodesk.Maya.ByB.G.7z   [CRC32:4EDF84A0]

AdvancedSkeleton_v3.1_3.5.For.Autodesk.Maya.ByB.G.7z   [CRC32:381EF3F7]

AdvancedSkeleton_v3.6.For.Autodesk.Maya.ByB.G.7z   [CRC32:B3D3CCD2]

AdvancedSkeleton_v3.6.1.For.Autodesk.Maya.ByB.G.7z   [CRC32:761A95CE]

AdvancedSkeleton_v3.7.For.Autodesk.Maya.ByB.G.7z   [CRC32:341E194D]


PDF教程校验:


AdvancedSkeleton_v1.85使用初步hxsd.pdf   [CRC32:6B39BFD2]

AdvancedSkeleton_v2.0详细教程5ds.pdf   [CRC32:B89F5677]

AdvancedSkeleton_v3.0使用讲解起点CG.pdf   [CRC32:CA3CFEBE]






软件介绍:



http://www.creativecrash.com/system/photos/000/010/285/10285/big/screen1.jpg?1251118603


http://www.creativecrash.com/system/photos/000/010/286/10286/big/lg_overview.jpg?1251118604


AdvancedSkeleton是Maya的角色设计的工具的合集。


主要特点是:

1.不再局限于预先设计好的FitSkeleton,而是可以创建任意的FitSkeleton;

2.具有本地旋转轴和旋转度,并可控;

3.可以从AdvancedSkeleton 回到 FitSkeleton,方便你做些改变然后重建AdvancedSkeleton;

4.AdvancedSkeleton在身体配置方面不再做限制,三个头,五条腿,100个手指都可以;

5.支持拖拽“Selector Designer"等

官方简介:


1. Introduction: AdvancedSkeleton is a collection of Maya tools for doing character setup. The Main Features of AdvancedSkeleton are: Not limited to a pre made FitSkeleton, you can create any FitSkeleton you like. The local rotation axis and rotation orders are set by the FitSkeleton, so you can control these. You can go back from AdvancedSkeleton to the FitSkeleton, and make changes and then rebuild the AdvancedSkeleton. Unlimited body configurations, 3 heads, 5 legs, 100 fingers, & anything goes. Comes with a drag`n`drop `SelectorDesigner`, that lets you easily create custom `Selector` user interfaces. And a `PoserDesigner`, that creates UIs for storing and retrieving poses.

1.简介:AdvancedSkeleton是对Maya工具集合做角色设定.AdvancedSkeleton主要特点是:不仅限于预先作出FitSkeleton,您可以创建任意FitSkeleton.本地的旋转轴和旋转的都是由FitSkeleton,你就可以控制这些.你可以从AdvancedSkeleton回到FitSkeleton,并进行适当修改,然后重建AdvancedSkeleton.无限体配置,3头,5腿,100的手指,什么事情都能发生。拖拽`ñ`SelectorDesigner`,让你轻松地创建自定义的`选择用户界面`和`PoserDesigner`,创建用于存储和检索用户界面构成。

2. Installation:
Run the SETUP file (setup.exe) Choose the Destination Folder NOTE: destination folder must be your Maya user directory e.g.: C:\Documents and Settings\Name\My Documents\Maya\2008\ Finish installation. Start Maya. Now you will find a new Shelf called 'advancedSkeleton`

2.安装:
运行SETUP文件(Setup.exe)选择目标文件夹注意:目标文件夹必须是您的Maya用户目录例如:C:\ Documents and Settings \用户名\ My Documents \maya\ 2008 \完成安装。运行Maya.现在,你会发现一个新的工具栏'advancedSkeleton`


3. Overview: The key functionality of AdvancedSkeleton is to: Generate a complex motion system (AdvancedSkeleton) from a simple joint chain (FitSkeleton)

Joints that are on the `negative X` side of origin, gets read as the characters right side,
and will mirror these to the left side. The following information gets read from the FitSkeleton joints: names, positions, rotations, rotation axis, rotation orders. It also reads the following from the joints to determine the high level controls: labels and dependencyGraph input/output connections. The following joint labels will create high level controls:

FitSkeleton joint labels:
AdvancedSkeleton high level controls:
"Hand" & "Shoulder" Arm IK
"Hip" & "Foot" Leg IK
"LegAim" 3 bone (dog leg) IK
"Heel", "Ball" & "Toe" FootRoll system
"BigToe" & "PinkyToe" Foot rock-side-to-side system
"Root" & "Chest" (optional:"Mid") Spine IK
"Eye" Look at.. aim system
"0", "1", "2", etc.. Spline IK. (for tails, trunk, ponytails, etc.)
"Prop" Props that can be translated. (for hats, glasses, etc.)
FitTools also let you add the following attributes to the FitSkeleton: "TwistJoints" : will generate joints for distributing twist rotation along a bone. "Global" : will generate a control for maintaining world space orientation. "FreeOrient" : will preserve joints orientation, instead of auto orienting to X down. dependencyGraph input/output connections: AdvancedSkeleton will attempt to read any input/output connections from the FitSkeleton, and recreates the setup on both left & right side on the AdvancedSkeleton. See a example of this by loading the "biped" FitSkeleton template, and select the "Wrist" joint. Note that there are several custom attributes for controlling the fingers. This is a simple set-driven-keys setup, and it gets analyzed by AdvancedSkeleton, and implemeted in the full rig. You can create your own custom attributes to control any parts of the FitSkeleton. And it is not limited to setDrivenKey, but virtually any nodes connected in any way.

"3.概述:在AdvancedSkeleton主要功能是:从一个简单的生成联合链(FitSkeleton一个复杂的运动系统(AdvancedSkeleton))"

4. The Tools:


FitTools Browse through available FitSkeleton, and import any of them to the scene. You can add a your FitSkeleton to the list of available FitSkeletons, by saving it to the installDir/FitSkeletons/ folder. FitTools also has buttons for adding or removing FitSkeleton attributes and labels.

AdvancedSkeleton Builds the AdvancedSkeleton from selected joint hierarchy. Select the top joint of the FitSkeleton before executing this.

Utilities Utilities has following tools: Rebuild: :The FitSkeleton is always kept with the AdvancedSkeleton, allowing for joint placement tweaks at any time. To expose the original FitSkeleton, click "Toggle Fit/Advanced". This will display the FitSkeleton, which allows you to tweak the original joint placement. Run "Rebuild Skeleton" after you made tweaks to the FitSkeleton. Any objects that have been parented to the skeleton, will be re-parented to the newly built skeleton. And by turning on the "Rebuild Connections" option, AdvancedSkeleton will also re-link hypergraph connections.(e.g skinning) Skinning: Go to Build Pose: applies all the values stored when the AdvancedSkeleton was first build. Select DeformJoints: selects the joints intended for binding (skinning). This can also be done by selecting all members of the "DeformSet" Hide / UnHide MotionSystem: Allows you to display ONLY the joints intended for binding. Useful when using `edit membership` or `paint weights` tools. Locking: Assigns joints to a layer called "jointLayer", and sets the layers displayType to "Reference", This is useful so animators do not accidentally select and manipulate the joints. Boxes: Create/Remove/Mirror Poly-Boxes to fit the character. These boxes can be used as low-res geometry representation of your character, or use the Boolean function to create a more accurate low-res representation. The Bevel function, creates rounded corners for all the boolean objects. Cylinders: Creates nurbs cylinders which provides a alternativ way for selecting the controls. The FK control cylinders are by default transparent, so that the geometry appear to be the controls. Character Set: 'CreateCharacter' :Brings together all the essential attributes of the skeleton and creates a `character set node`, for Maya's non-linear animation tools. KillCharacter': Bakes all clips on selected character and restores keys to original nodes. Control Curves: Mirrors the shape of the control curves from left to right or vice versa After you created the AdvancedSkeleton, you might find that the control curves. are not ideally scaled/positioned for easy selecting. So you might have to sculpt the curves (by moving/scaling the cv`s) to fit better. This mirror tool allows you to do the adjustments on one side, then mirror it across. Partial Joints: creates child joints in the deformationSystem that rotates partially to its parent, Skinning to these joints provides partial rotation effect without the loss of volume that occurs when blending weights. FitMode: Preserves X-down joint orientations, and maintains set driven keys. This allows you to move joints, without loosing it`s X down alignment. Also lets you rotate finger joints, and preserve the `curl` set driven keys. Display: Joint size: Set the joint display size.

SelectorDesigner This tool is for creating `Selection Tools`. When you first open this, it will be blank.
First step is to bring in an image of your character as the background (Edit->Background..)
Next you need to create the buttons. To create a button: 1.Select the animation control object that you want the button to select when clicked. (e.g. "FKWrist_R") 2.Use the middle mouse button to `click and drag` the area you want the button.
Finally make sure to save the newly created tool. (File->Save) Once saved, you can add a shelf button that will launch the tool (File->;Put on shelf) See animated gif for how to use create buttons, and access the popup menus. These `Selection Tools` that are built by the `SelectorDesigner`, are free to be distributed. AdvancedSkeleton is not required to run these. A example `Selector` called "biped" is provided, click the last button on the shelf to run it. This is what the "biped" selector looks like:
Selector Tools comes with animation utilities menus.

PoserDesignerThis tool is for creating `Poser Tools`. When you first open this, it will be blank.
Along the toolbar of the window are the following controls:
By using these controls, you can build up your poser library:
Finally make sure to save the newly created tool. (File->Save) And like SelectorDesigner, you can add a shelf button that will launch the tool (File->;Put on shelf) `Poser Tools` built by `PoserDesigner` are also free for distribution, and does not require AdvancedSkeleton. Note that if you use the `only selected` option, then not only does the selected controls alone get stored, but it also looks for selected attributes in the channelBox. If you select 1 object and 1 attribute, and the attribute is of the `Limited Range` type attribute, then a slider will be generated to control the attribute (useful for blendShape attributes). The "anim" checkBox allows you to store animation clips instead of poses. Applying poses/animations: To apply pose/animation to your character simply click a button. To select or key the controls that are part of the pose/animation, right>click>.. a button. To apply pose/animation at the characters current position shift>click a button. To apply animation relative to current time shift>click a button. To apply animation relative to current values ctrl>click a button. Poser Tools comes with animation utilities menus.
Help Open the help files in a browser.

Selector:biped This is a sample `Selector`, created with the SelectorDesigner tool.

"4.工具介绍:"


5. Animation Utilities: Tools created by SelectorDesigner or PoserDesigner comes with a standard set of menu items, providing useful utilities for the animator.



-Edit>Refresh: Rescan the scene, and update the character drop down menu.
-Pose>Copy: Copy current pose. Ctrl/Alt>click will copy selected controls only. >;Paste: Paste pose. Ctrl/ Alt>click keeps the All control in the same place. >Reset: Go to Build Pose >Mirror: Mirror Pose. Use optionBox to specify side, space & axis. -Anim>Copy: Copy animation. Ctrl>click will copy selected controls only. >;Paste: Paste animation. Alt>click pastes "relative to current time" Ctrl>click pastes "relative to current time & values"

"5.动画工具:由SelectorDesigner或PoserDesigner创建工具附带了一个菜单项规定的标准,为动画师有用的实用工具。"


6. The Controls:
FKIKControlCurves For every IK system there is a FKIKControlCurve. These are the controls that let you blend between FK / IK modes,
The attributes for these control curves are: FKIKBlend: value 0 = FK and value 10 = IK.
FKVis: value On = FK-Control-Curves visible
IKVis: value On = IK-Control-Curves visible
The FKVis / IKVis attributes are used for changing / animating the visibility of FK- / IK- Control-Curves. Useful for displaying only the ControlCurves needed for the mode you are working in.
FKCurves The FKCurves are light-blue circles.
These controls can only be rotated. The following attributes might be found on this type of control: global: for maintaining world space orientation.


IKCurves
The IKCurves are red boxes.
IKCurve can be translated and rotated (PoleVectorCurves can only be translated). The following attributes might be found on this type of control: swivel: sets the orientation of the knee follow: for switching whether to inherit parent transform or not. roll: foot rolling from heel to toe. rollAngle: the number of degrees to `roll` each transform in the foot roll system stiff: sharpness of splineIk curvature. stretchy: for blending in/out IK stretching. antiPop: set amount of scale compensating to avoid IK popping. See animated gif for example of antiPop.

IKCurves(foot-roll) Controls for manual rolling of heel and toe.
WagCurves Controls the automatic `wagging` function. The best way to understand this feature is to animate the rotation and see the effect. The added attributes are: use: turn this `on` to enable the calculation of the wag. timeOffset: number of frames to delay animation for each joint in the chain. multiply: rotation amount multiplier for every joint in the chain. increment: amount of increment of rotation for each joint in the chain towards the last joint.

PropCurves The PropCurve is similar to the FKCurve, except that the PropCurve can be translated.

AimCurves This controls the `Look At` aim system. Most used for eyes, were this control is the target that the eyes look at. The added attributes are: cross: Amount of cross eyed. Default is 1, where the eyes will be looking straight forward (empty stare) Set the value to 0, where the eyes will be converging to focus on the AimCurve control. follow: for switching whether to inherit parent transform or not.

CenterCurves This controls the top of the AdvancedSkeleton FK hierarchy. The following attributes might be found on this type of control: CenterBtwFeet: Set whether the center of the character should automatically be kept between the IK feet. Extra All the animation controls have a "Extra" control. These a accessed by selecting a curve, then pick-walk up (up-arrow). The `Extra-Controls` can be useful for many situations, such as avoiding gimbal lock. The shapes and colors of these control curves can be changed, by modifying the file: "asCurveIcons.ma".

6.控制:
FKIKControlCurves的IK系统有一个FKIKControlCurve。这是控制,让你混合在一起FK/IK模式,
这些控制曲线的属性:FKIKBlend:值0 = FK和值10 =IK。

7. Feedback: AdvancedSkeleton is constantly improving with input from the users. If you have any suggestions/comments about AdvancedSkeleton, please do not hesitate to contact us. support@animationstudios.com.au Copyright 2009 'Animation Studios'

"7.反馈:"





操作日志

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2009.12.24
===============================================================================
3.0是今天凌晨刚刚到手..嘻嘻...
本人测试安装.. 确实可用..
改善了一些蹩脚的功能.. .
希望大家能用的上..


习惯使用1.85或者2.0版本的人也可以在这里找到这些.. .

第一次发帖..
格式可能不是很标准..
还请大家多多包含.. .

也借此机会.
回报那些无私分享资源的人们.
.
谢谢你们.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2010.01.06
===============================================================================
大概是家里速度慢的关系.. 我尽量24小时开机.. .

另外补充一个1.85+2.0+3.0的集合压缩包.
因为收到过好多反馈..貌似1.85和2.0资源少的很抽象.. .
希望大家多多分流.

如果很急用的话..可以把邮箱留下.. .
^^.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2010.06.30
===============================================================================
更新了3.1版本.. 作者介绍.. 可以兼容Maya2010和2011.. 不过貌似有Bug报2011运行出错的.. 2011版本的还是慎用吧.. 嘿嘿... .
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2010.09.15
===============================================================================
更新3.5版本
官方更新日期:2010.08.24
支持系统:linux, mac, windows
软件版本:6.x, 7.x, 8.x, 2008, 2009, 2010

至于2011..., 还是谨慎吧.., 版本里并没有写2011..,

不过生命在于尝试 (ps: ^^.., 虽然我没试过..,)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2010.11.27
===============================================================================
更新3.6版本
Created / Updated:Sep 26, 2000 / Oct 22, 2010
Platforms:linux, mac, windows
Maya:6.x, 7.x, 8.x, 2008, 2009, 2010
(官方依然没写支持2011..不过看评论有2011用3.5咯..,应该3.6也ok.)

顺带从别的论坛摘抄的1.85,2.0,3.0教程.
(基本都是人家原创,.大家参考一下就好,支持人家劳动成果还是必要的.所以被我整成了不可编辑的PDF..)

更新1.85版本的链接.
(据说之前1.85已经成死链了..)
教程有针对1.85.所以更新一下
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2011.01.19
===============================================================================
3.6.1版本修正了一些3.6版本的FKIK的Bug,增强了对Maya2011支持.
工作有些忙,刚闲下来更新.
大家见谅.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2011.02.26
===============================================================================

更新3.7版本.但是工作有些忙.就不做安装测试了.
希望大家体谅.

---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
===============================================================================

正在读取……

这里是其它用户补充的资源(我也要补充):

暂无补充资源
正在加载,请稍等...

点击查看所有172网友评论

 

(?) [公告]留口水、评论相关规则 | [活动]每日签到 轻松领取电驴经验

    小贴士:
  1. 类似“顶”、“沙发”之类没有营养的文字,对勤劳贡献的楼主来说是令人沮丧的反馈信息。
  2. 提问之前请再仔细看一遍楼主的说明,或许是您遗漏了。
  3. 勿催片。请相信驴友们对分享是富有激情的,如果确有更新版本,您一定能搜索到。
  4. 请勿到处挖坑绊人、招贴广告。既占空间让人厌烦,又没人会搭理,于人于己都无利。
  5. 如果您发现自己的评论不见了,请参考以上4条。