楼主全tmd乱写,东西是可以用的
解压后,把ppc文件夹复制到磁盘根目录,这里以D为例子说明
运行cmd,输入d:
然后cd ppc
然后ppc.exe configfile
就可以了 选择1 就可以玩了
运行的奇卡无比!!!
啊 boss啊! 超顶!!!
312楼已被删除
让我来造福大家吧
ppccfg.example修改全文{覆盖原文}
## PearPC Configuration File
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
ppc_start_resolution = "800x600x15"
##
## Redraw interval (in ms)
## must be between 10 and 500
##
## If you set this higher, PearPC will spend less time doing redraws (and so run faster)
## but feel less responsive. You should adjust this to your computer speed and personal
## preference.
##
redraw_interval_msec = 40
##
## Key codes
##
key_toggle_mouse_grab = "F12"
key_toggle_full_screen = "Alt+Return"
##
## Loader
##
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile
##
prom_bootmethod = "auto"
## Example of how to use "force":
#prom_bootmethod = "force"
#prom_loadfile = "test/yaboot"
#prom_env_bootpath = "disk"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup
##
#prom_env_bootargs = ""
prom_env_machargs = "-v"
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
##
## Processor Version Register
## # default: 2
#ppc_start_resolution = 5
#fs_refresh_rate = 85
redraw_interval_msec = 50
prom_bootmethod = "select"
memory_size=0x20000000 pci_ide0_master_type / pci_ide0_master_installed = 1
pci_ide0_master_image = "D:\Mac OS X 10.3\ppc\mac.img"
pci_ide0_master_type = "hd"pci_ide0_slave_type = "cdrom"
##
## Network
##
## Choose one of the cards
pci_3c90x_installed = 0
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 0
pci_rtl8139_mac = "de:ad:ca:fe:12:35"
##
## USB
##
pci_usb_installed = 1
##
## NVRAM
##
nvram_file = "nvram"
然后看第二也评论写的就OK了(楼主骗人,我玩了半小时才整出来)呜呜
322-323楼已被删除
按上面所说,但是运行后出现这样的东东。。。。???
D:\>D:\ppc\ppc.exe configfile
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as published by
the Free Software Foundation.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA
[IO/IDE] <Error> mac.img: could not open file (No error)
D:\>
Some Rights Reserved. 上海隐志网络科技有限公司
lymlieder
2011/04/10 22:56:46 301楼
举报
我dell m90
cpu: t7200
内存 2G
显卡 nvdia fx2500m
你是怎么装的···请教一下 为什么我在 运行 里的时候总提示找不到文件? 应该没问题的··· 请教~!